| Customization: | Available |
|---|---|
| Type: | H (Heat Resistant Low Alloy Steel/ Stainless Steel Electrode) |
| Material: | Stainless Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Welding Stick / Soldering Rod (AWS E310-16)
The soldering rod / welding stick belongs to stainless steel electrode, which is used to weld stainless steels of similar composition in wrought and cast form. Solder provides you with outstanding performance for the out-of-position welding of 310-type stainless steels, especially when ease of execution and fine weld appearance are required. The weld deposit of the soldering rod is fully austenitic, and as such calls for minimum heat input during welding.
Size: 2.5MM X 300MM (Packing :5kg/inner boxes 4 boxes/cartons=20kg 1 ton/pallet)
Size: 3.2MM X 350MM (Packing: 5.0kg/inner boxes 4boxes/cartons=20kg 1 ton/pallet)
Size: 4.0MM X 400MM (Packing: 5.0kg/inner boxes 4boxes/cartons=20kg 1 ton/pallet)
Size: 4.0MM X 400MM (Packing: 5.0kg/inner boxes 4boxes/cartons=20kg 1 ton/pallet)
Company Information
Lin'an Dayang Welding Material Co., Ltd., located in the western part of Hangzhou, was established at the beginning of this century. We possess a production line of oil pressure unit, which can produce 5000 ton stainless steel welding electrodes. Our company owns rich technical resources to design, research and mainly produce special type of electrodes with complete models.
The electrodes are mainly exported and the amount is up to 2000 tons per year on average. Our customers are mainly from Germany, Indonesia, Singapore, Philippines, Vietnam, Thailand, Bengal, and Egypt. They think highly of our products all the time.
In the days of 21st century, we will be stricter with ourselves and have continuous technical innovation which will spur us on to higher quality products for our users. Customers at home and abroad are sincerely invited to visit, call and hold talks on internet.
| Chemical composition of deposited metal (%) | |||||||||||||||
| Chemical Composition | C | Mn | Si | Cr | Ni | S | P | Mo | Cu | ||||||
| Typical | 0.08 | 1.9 | 0.40 | 27.5 | 21.2 | 0.010 | 0.010 | 0.11 | 0.09 | ||||||
| Specification | 0.08~0.20 | 1.0~2.5 | ≤0.75 | 25.0~28.0 | 20.0~22.5 | ≤0.03 | ≤0.03 | ≤0.75 | ≤0.75 | ||||||
| Mechanical properties of deposited metal | |||||||||||||||
| Mechanical properties | Tensile Strength (MPa) |
Elongation (%) |
|||||||||||||
| Typical | 590 | 38 | |||||||||||||
| Specification | ≥550 | ≥25 | |||||||||||||
| Welding details | |||||||||||||||
| Electrode diameter | Φ2.5 | Φ3.2 | Φ4.0 | Φ5.0 | |||||||||||
| Electrode length | 300 | 300 | 400 | 400 | |||||||||||
| Welding current | 50-80 | 80-110 | 400 | 160-200 | |||||||||||
){kind=link}